How To Setup Brother Printer Wifi

How To Setup Brother Printer Wifi

  • Home
  • Brother Printer Wifi Setup

Brother Printer Wifi Setuo

To know how to setup Brother printer wifi network connection, refer to any one of the procedures mentioned on this web page. Note: The steps vary depending on the model of the Brother printer.

Procedure 1 - Control Panel:

  • Check if the Brother printer is turned on.
  • Go to the Brother printer’s control panel and choose the appropriate options to enable the Wi-Fi feature.
  • You need to choose the SSID ( network name) of your router’s network. Make sure to enter the correct password if prompted.
  • These network details are available on the rear side of the wireless router’s sticker.
  • Your computer should be connected to the same network for Brother Printer wifi setup.
  • Visit the manufacturer website and download the printer driver file by clicking the Download button.
  • Search for the saved printer driver file in the Downloads folder and double-click it.
  • Continue with the how to setup Brother printer wifi prompts to complete the installation process of the Brother printer driver on the computer.
  • Make sure to select Wireless as your Connection type when prompted. Once the connection driver is installed and the printer and computer are connected over the network, print a test page.

Procedure 2 - WPS Push Button Mode:

To perform this method, your wireless router and the Brother printer need to support WPS.

  • Make sure the Brother printer setup is connected to the power source and is turned on.
  • Position the Brother printer near to the wireless router and proceed with how to setup Brother printer wifi guide.
  • Hold the WPS button on the wireless router’s control panel.
  • Go back to the Brother printer and press the Brother Printer wifi setup button.
  • Wait until the printer searches for the wireless network and connects to it.
  • Once the connection is set up successfully, you have to install the latest version of the Brother printer driver on your computer.

Procedure 3 - WPS PIN Mode

  • Power up your Brother printer and router.
  • Generate an eight-digit PIN by selecting the appropriate options on the control panel.
  • Go to your computer, access the wireless router’s web page using its IP address, and navigate to the WPS page.
  • Provide the eight-digit PIN that is displayed on the Brother printer’s LCD panel.
  • Proceed with the rest of the instructions displayed on the printer to finish the wireless setup.
  • In this procedure, the wireless router is considered to be Registrar.
  • Note on using how to setup Brother printer wifi guide: You can also use the computer as Registrar to configure the Brother printer for the wireless network.