hp-laserjet-m507x-printer

HP Laserjet Enterprise M507X Setup

Laserjet Enterprise M507X Setup

  • Start with unpacking the printer to perform the hardware setup of the HP Laserjet Enterprise M507X printer.
  • Make sure to take all the packing and protective materials inside and outside the machine.
  • Press the release button to open the front cover of the machine. Place the new toner cartridge after unpacking it from the package.
  • Close the HP Laserjet Enterprise M507X printer’s front cover properly.
  • Pull and lift the paper tray 2 to remove it from the machine. Slide the adjustment latches and paper guides to fit some plain paper in the paper tray 2.
  • Use the power cable to connect its one end to the rear port of the HP Laserjet Enterprise M507X printer.
  • The power cord’s other end should be plugged into the AC power outlet.
  • Search for the Power button on the left side of the machine and hold it. This will power on the HP Laserjet Enterprise M507X printer.
  • On the machine’s control panel, set your language, date/time, and time zone for the machine.
  • Make sure to enable the USB port of the machine. This feature is disabled by default.
hp-laserjet-enterprise-m507x-setup
  • Select the General option from the Settings list. Select the Enable Device USB option followed by the Enabled option.
  • Do not plug the USB cable until you see the prompt message to establish a USB cable connection while installing the driver of the HP Laserjet Enterprise M507X printer.
  • Install the product software on your computer.

HP Laserjet Enterprise M507X Driver

Drivers available for the HP Laserjet Enterprise M507X printer are mentioned below.

  • Full Software Solution
  • HP Easy Start Setup Software
  • PCL 6 V3 Printer Driver
  • PCL 6 V4 Printer Driver
  • HP Universal Print Driver

HP Laserjet Enterprise M507X Driver Download

Download the Full Software Solution (recommended) driver by clicking the Download button on the product manufacturer site.Alternatively, click the link mentioned on this website to download the driver of the HP Laserjet Enterprise M507X printer driver.

HP Laserjet Enterprise M507X Manual

The essential manuals of the HP Laserjet Enterprise M507X printer for the user are listed here.

  • Installation Guide
  • User Guide
  • Warranty and Legal Guide
  • The Installation Guide manual assists the user in performing the hardware setup of the machine.
  • The topics included in the User Guide manual are printer overview, printer functions, managing the printer, and solve printer problems.
  • Get a soft copy of the HP Laserjet Enterprise M507X printer manual from our website by clicking the Manual Download button.
hp-laserjet-enterprise-m507x-manual
  • The manufacturer has also provided the manual links on the official site. Click this link to view the selected manuals on your computer.

HP Laserjet Enterprise M507X Wireless Setup

The wireless network connectivity is not supported on the HP Laserjet Enterprise M507X printer.To print wirelessly, enable the Wireless Printing feature on the machine.This is supported only on your Android and iOS devices.

Enabling Wi-Fi direct

  • On the operation panel of the HP Laserjet Enterprise M507X printer, select the Settings or gear icon.
  • Select Networking Wi-Fi Direct Status.
  • Select the ON option followed by the OK option to enable the Wi-Fi Direct feature.
  • Now, you can print any documents from your mobile phone using Wi-Fi Direct.
hp-laserjet-enterprise-m507x-wireless-setup

HP Laserjet Enterprise M507X Troubleshooting

The HP Laserjet Enterprise M507X printer faces the following issues. Cartridge is low message

  • Printer does not pick up any paper or misfeeds
  • Paper jams
  • Poor print quality
  • Wired network problem
  • Wireless network problem

Below is the solution for the wired network problem on the HP Laserjet Enterprise M507X printer.

Physical connection

  • Check the cable connection.
  • If the connected cable is damaged, replace it with a new one.
  • Ensure that you have connected the cable to the correct port on the rear side of the machine.

Computer not communicating with the machine

  • Launch a Command Prompt window by entering ‘cmd’ in the Run dialog box on your Windows computer.
  • Enter ‘ping’ without including the single quotes followed by the machine’s IP address.
  • If the ping command fails, select the Printer Properties option from the printer menu and click the Ports tab.
  • Check if you have selected the existing IP address of the HP Laserjet Enterprise M507X printer.

Network settings

  • Check for the status of the network on the configuration/networking page of the HP Laserjet Enterprise M507X printer.
  • If required, reset the router and reconfigure the network settings of the machine correctly.