HP ENVY 6455 SETUP

• Before installing this app, disable the VPN connection on your computer, if it is enabled.
• Download and install the HP Smart app on your Windows or Mac computer.
• Open the app.
• If prompted, sign in to your HP account.

• Click the Plus icon or the Add a New Printer option when prompted.
• Connect your printer to the computer by following the instructions displayed on the screen.
• Sign up for HP’s Instant Ink subscription program if necessary.
• Now, load the paper and install the HP ink cartridges to finish the HP Envy 6455 printer setup process.

• Pull out the input tray of your printer.
• Move the guides to the ends.
• Load a stack of the desired paper type into the tray.
• Check to ensure that the letter, A4, or U.S. paper is loaded with its printable side facing up.

• Adjust the guides properly.
• Push in the tray towards the printer.
• Open the output tray of your printer.

• Raise the scanner unit of your printer.
• Now, you can see the cartridge carriage moving from left to right and vice versa; it might take a few seconds to become stable.
• Meanwhile, prepare the ink cartridges.
• Remove the cartridges from the package.
• Gently peel off the plastic tapes from the cartridges.

• Make sure that the carriage has become stable.
• Now, open the ink lids.
• Install the black ink cartridge in the right slot and the color cartridge in the left slot.
• Close the lids followed by the ink cartridge access door.

• As soon as the input tray is loaded and the ink cartridges are installed, the printer automatically starts to print an alignment page.
• Once the alignment page is printed, open the scanner lid and place the page on the glass with its print-side facing down.

• Close the lid.
• Now, scan the page by pressing the Color button on its control panel.

Congratulations! You have successfully completed the HP Envy 6455 setup process.

• Go to the HP printer’s official page.
• Choose your printer model from the product list.
• Click the Software, Drivers and Firmware tab followed by Go.
• Check if the OS type for which you want to download the driver is selected correctly on the Software and Driver Download page.
• If not, select your OS type manually from the drop-down menu.
• Now, locate the recommended printer driver available for the selected OS type.
• Click the Download button.

• Now, the selected printer driver file will start to download on your computer.
• Once it is downloaded, open the driver file and follow the on-screen instructions to finish the driver installation process.

Just one click away…

• Click the Driver Download button provided on this page to download the HP Envy 6455 printer driver for your computer easily and quickly.
• Now, the printer driver available for your current OS type will start to download.

• The HP Smart app is the recommended HP Envy 6455 printer software for Mac.
• Additionally, you will get the firmware update tool.
• You can download this tool and app from the HP printer’s official support page.

• You can download this tool and app from the HP printer’s official support page.

• Open the official support page of your HP printer.
• Click on the Manuals tab.
• Select the user guide you want from the list.

• Click the Download icon if necessary.
• Once the manual is downloaded, you can use it as per your preferences.

• Initially, check to ensure that your HP printer is not connected to the computer using the USB cable.
• Now, run the HP Smart app or the HP printer driver file on your computer.
• Follow the on-screen instructions.

• When prompted, connect your printer directly to the computer using the USB cable.
• Install the printer driver on your computer by following the rest of the instructions displayed on the screen.

• Initially, enable the WPS Push Button method on your printer.
• Hold down the Power and Wi-Fi buttons on your printer’s control panel for a few seconds.
• As soon as the edge lighting shows up on your printer, release the button.
• Next, turn on your wireless router if it is turned off.
• Locate the Wi-Fi Protected Setup button on the router and press it.

• Now, your printer will try to connect to the network.
• Once it is done, connect your Windows or Mac computer to the same network.
• Install and open the HP Smart app on your computer.
• Add your printer to the computer by following the instructions displayed on the screen.

• Start the WPS PIN method on your printer.
• To do so, turn on your HP printer if it is turned off.
• Now, hold down the Information button on your printer’s control panel for a few seconds.
• As soon as all the buttons on the panel light up, release the Information button.
• Now, press and hold the Resume and Information buttons at the same time to start the WPS PIN method on your printer.
• Once it is enabled, you can see the purple light glowing near the edges of your printer.

• Note down the WPS PIN credentials of your printer.
• Now, go to your router’s GUI page.
• Click WPS.
• Type your printer’s WPS PIN in the given field.
• Click the Apply button.
• Now, connect your Windows or Mac computer to the same network.
• Install the printer on your computer using the HP Smart app or the HP printer software.

PAPER JAM

A paper jam can cause many problems like paper-feed, unable to print, etc. Follow the instructions below to fix the paper jam problem on your printer.

• Initially, restart your HP printer.
• Next, remove the remaining paper left in the input tray.
• Look for the jammed paper inside the printer.
• If you find any, remove it from the printer.
• After removing the jammed paper, press the Cancel button to clear the error message.
• Now, re-load the input tray and print a test page to check whether the paper jam issue is resolved.
• If the printer prints the page successfully, the paper jam problem is fixed.
• Otherwise, recheck the printer for the jammed paper.

Cartridge problems

This issue is faced by many people after installing the ink cartridges on their printer.

• Check whether the ink cartridges are installed properly.
• If not, remove and reinstall them.
• Make sure that the cartridges are unpacked correctly.
• Clean the cartridge contacts if necessary.
• To do so, turn on the printer if it is turned off.
• Open the access door of your printer.
• Locate and remove the defective cartridge.
• Now, clean the contacts using a lint-free cloth.
• After cleaning the contacts, reinsert the cartridge and close the door.