How To Setup My Canon Mx922 Printer

Canon Mx922 Setup

Canon MX922 is an All-in-One Wireless printer with the Wireless LAN, AirPrint, Google Cloud Print, Wireless printing, and Mobile Device Printing features. To perform the initial hardware and software setup of the Canon MX922 printer, refer to the simple step-by-step how to setup my Canon Mx922 Printer guidelines mentioned on our web page.

how to setup my canon mx922 printer

Unpacking the Canon MX922 Printer:

  • Once you purchase the Canon MX922 printer, take it out of the box.
  • Ensure that the following components are available inside the printer box.
  • Manuals and other documents
  • Matte photo paper
  • Setup CD-ROM
  • Setup ink tanks
  • Power cord
  • Telephone line cable
  • The protective and packing materials from the outside of the Canon MX922 printer must be removed.
  • Ensure that the protective tapes inside the printer are also removed.

Powering Up The Canon MX922 Printer:

  • Use the power cord that is provided along with the printer to connect a wall power outlet and the Canon MX922 printer.
  • On the top panel of the printer, find the Power button and hold it until the Power LED stays lit.
  • This will power up the Canon MX922 setup printer.

Language Settings:

  • Now by following how to setup my Canon Mx922 Printer, you will see the prompt to set the language on the control panel of the Canon MX922 printer.
  • After you choose your preferred language, press the OK button.
  • When the ‘Select OK and start the setup by referring to the Getting Started instructions’ message appears on the display panel of the Canon MX922 printer, press the OK button.

Ink Tank Installation:

  • Raise the Canon MX922 printer’s document cover and then open the ink cover.
  • Take the new ink tank that is provided along with the printer and move on with how to setup my Canon Mx922 Printer guide.
  • Unwrap the protective material from the ink tank.
  • Remove the orange cap from the ink tank.
  • Push the ink tank in its ink slot correctly.
  • Do the same to insert the rest of the ink tanks in their ink slots.
  • Now, check if all the ink LEDs are lit.
  • If so, the ink tanks are installed correctly.
  • Close the ink cover and then close the document cover of the Canon MX922 setup printer.
  • Wait for three minutes and check if the ‘Charging Do not close the paper output tray ‘ message is shown on the LCD panel of the Canon MX922 printer.
  • Once you close the paper output tray, its extension closes automatically.

Print Head Alignment:

  • Remove the cassette from the Canon MX922 printer.
  • Move the paper guide to the outermost end and load some A4 paper into the cassette.
  • Fit the A4 paper correctly in the cassette according to its dimension by sliding the paper guide.
  • Place the cassette back into the Canon MX922 printer.
  • Make sure to open the paper output tray.
  • Pull the paper output support out of the printer on using how to setup my Canon Mx922 Printer instructions.
  • Now, the ‘Head alignment required Load specified paper in the cassette and press OK’ message will display on the printer’s LCD panel.
  • Press the OK button on the control panel of the printer setup.
  • Wait for five to six minutes. This will print a blue-black pattern page.
  • After you finish the print head alignment process of the Canon MX922 printer, move on to the remaining steps.

Loading Plain Paper:

  • If the ‘Load plain paper in the cassette’ message appears on the printer’s LCD panel, close the paper output support and place enough plain paper in the cassette.
  • Now on following how to setup my Canon Mx922 Printer guide, you have to press the OK button on the Canon MX922 printer’s control panel.

Wireless Setup:

  • The ‘Start wireless LAN Setup’ screen will open.
  • Select either the Start Setup or Cancel for Now option.
  • If you want to connect the Canon MX922 printer to wireless LAN, select the Start Setup option.
  • Continue with the steps shown on the printer’s display panel to finish the wireless LAN setup.

Canon MX922 Printer Software Installation:

  • Place the setup CD-ROM in the computer’s CD drive.
  • If you use a Windows computer, the AutoPlay window will appear on the screen. Select the Run option to begin the installation process of the Canon MX922 printer.
  • If you are using a Mac computer, the Canon_IJ window will open. Click the Canon Mx922 Setup icon to begin the Canon MX922 printer driver installation on the Mac computer.
  • Click the Next button and proceed with the remaining instructions that appear on the screen to complete the driver installation process of the Canon MX922 printer.
  • Now, you can perform the printer functions from the computer.
  • Instead of using the setup CD-ROM, you can download the setup file from the manufacturer website.

Fax Setup:

  • You can perform the fax setup whenever needed.
  • On doing how to setup my Canon Mx922 Printer guide, Use the telephone line cable to connect the Canon MX922 printer and a phone jack.