How To Setup Epson Workforce Pro Wf 3720

How To Setup Epson Workforce Pro Wf 3720

  • Home
  • Epson Wf 3720 Setup

Epson Wf 3720 Setup

The Epson WorkForce 3720 is an All-in-One color printer. It can perform the print, scan, copy, and fax operations. The Epson WorkForce 3720 is easily one of the most cost-friendly printers around, and with the 250-sheet paper capacity, you never have to replace papers at regular intervals. The other features that can provide your more comfort are the 2.7 inches color touch screen, the 30 page Auto Document Feeder(ADF), and Duplex printing. The step by step how to setup Epson workforce pro wf 3720 procedure to set up a new Epson WF Pro 3720 printer is given below.

  • Unbox the Epson WorkForce Pro 3720 from the carton box. You will have the following accessories inside the printer box.
  • The Epson WorkForce Printer
  • Power Cord
  • The Epson ink cartridges
  • User Guide
  • Software CD
  • Take out the Epson printer from the box with the help of the handle provided along with the machine.
  • Remove the protective tapes surrounding the printer.
  • Lift up the scanner unit and remove the protective tapes present inside and proceed with how to setup Epson workforce pro wf 3720 steps.
  • Plug one end of the power cable to the power source and the other end to the rear end of the Epson printer.
  • Lift the printer’s Control Panel slightly up and press the Power button located on the left side for Epson Wf 3720 Setup.
  • Select the printer Language (your preference) the Country and Time using the printer’s control panel.
  • Now lift the scanner unit to install the ink cartridges.
  • Gently shake the ink cartridge before unpacking it.
  • Hold the sides of the cartridge and remove only the yellow protective tape.
  • Now, gently insert the ink cartridge into its slot until it clicks into its position.
  • Similarly, install all the ink cartridges on the printer.
  • Search for the saved printer driver file in the Downloads folder and double-click it.
  • Continue with the how to setup Epson workforce pro wf 3720 prompts to complete the installation process of the Brother printer driver on the computer.
  • Make sure to select Wireless as your Connection type when prompted. Once the connection driver is installed and the printer and computer are connected over the network, print a test page.
  • After inserting the cartridges, close the scanner unit gently.
  • Lower the Control Panel, lift the output tray from the printer setup and pull out the paper cassette.
  • Slide the paper edges to the corners, insert the stack of papers with the glossy part facing down.
  • Slide the paper guides to the edges of the paper and make sure it is not holding the papers tight as it might lead to paper jams.
  • Slide the paper tray into the printer.
  • Pull out the paper extension to get the print copies after the print job.
  • Connect the Fax line to the printer if necessary.
  • The initial Epson Wf 3720 setup is now complete.
  • Following that, download the Epson printer driver from the official Epson support page, choose the operating system, and install it on your computer.
  • In the installation wizard, select your preferred connection method and follow the how to setup Epson workforce pro wf 3720 instructions displayed on-screen to complete the printer setup process.