how to set up a network switch and router

How To Setup A Network Switch And Router?

  • Home
  • Setting up A Network Switch, Router

Setting up A Network Switch And Router

This web page provides you the easy instructions to know how to set up a network switch and router and estabilish your network settings.

Network switch:

It is a networking device that helps to connect multiple devices over a network. It manages data flow across a network.

Router:

On the other hand, the router is a networking device that transfers data between devices connected to a network. The major function of the router is to manage network traffic.

Network switch and router:

  • If you have only 4 or fewer devices, you can use the router along with the modem to set up a network.
  • In case you wish to have more than 4 devices on your network, you must expand it using the network switch.
  • Different types of network switches are available. They are 8-port, 16-port, and 32-port switches.
  • Depending on your need, purchase a suitable network switch or to know how to set up a network switch and router.

Connecting the network switch to a router:

Step 1

First, establish a connection between your modem and the telephone wire.

Step 2

  • Take an Ethernet cable and plug its one end into the Ethernet port of the modem.
  • Note: The Ethernet port is located at the rear side of the modem and to know how to set up a network switch and router.
  • Connect the other end of the Ethernet cable to the WAN port of the router. Usually routers have only one WAN port. The remaining ports are the LAN ports.

Step 3

Take another Ethernet cable and establish a connection between the LAN port of the router and the network switch.

Step 4

  • Connect the router’s power cable and the network switch’s power cord to the power source.
  • Turn on both the devices.
  • Now, you can connect your networking devices like computers and laptops to the switch using Ethernet cables to set up the network.

Step 5

  • Access the web-based management page of the router from a web browser on your computer connected to the network switch using the IP address, username, and password of the router.
  • Customize the router settings, such as login credentials, SSID, password, etc. And finally you know how to set up a network switch and router.