Epson Wf 110 Setup

Epson WF 110 Setup

Epson Workforce WF110 Setup

The Epson WF 110 setup printer is a lightweight device that can deliver high-quality print outputs. It has a built-in battery and can be charged through a USB port.

  • First, unpack the Epson WorkForce WF110 printer.
  • Inside the printer package, you can find the printer, power cord, adapter, micro USB cable, software CD, ink cartridges, and replacement maintenance box.
  • Now, connect the printer to an electrical outlet using an adapter.
  • If required, charge the printer for a while.
  • For the printer’s battery to get fully charged, it takes about 2.5 hours.
  • After charging the printer, continue the Epson WF 110 setup process by opening the top cover of the printer.
  • On the left-hand side of the printer, you can find the Power ON/OFF button, press it.
  • As soon as the Epson WorkForce WF110 printer turns ON, the prompt message Select your language appears.
  • Choose your language and tap the OK button.
  • If any error code is displayed on the printer’s screen, then switch off your Epson WorkForce WF110 printer and check if any packing materials are left inside the device.
  • If so, remove them and then continue with the setup process.
  • Now, install the ink cartridges into the Epson WorkForce WF110 printer.
  • Unpack the genuine ink cartridges provided with the printer.
  • You can find the inner cover inside the printer, open it and insert the ink cartridges into the respective slots.
  • After installing the ink cartridges, close the inner cover.
  • Now, to load a stack of plain paper, extend the top cover’s slide edge guide to the left on Epson WF 110 setup printer.
Epson WF 110 wireless setup
  • Place of a stack of 20 sheets into the tray. 
  • Adjust the paper guides properly.
  • Tap the OK button when the printer displays the Completed message.
  • The printer’s hardware setup is done. Now, you can begin the software setup.
  • You can use the Wireless or Direct USB connection method to connect your Epson WorkForce WF110 printer to your Windows or Mac system.
  • You can use a micro USB cable to perform the Direct USB connection method.
  • Make sure not to connect the Epson WF 110 setup printer to your computer before the Epson WF 110 driver installation.
  • Connect both the devices only when prompted during the driver installation.
  • For any queries or doubts related to the printer setup, contact our technical support team.

Epson WF 110 Driver

To perform printer-related operations from a computer, the printer's driver must be installed on your computer. Usually, the driver installation software CD will be provided with the printer package while purchasing the product from the printer’s official site or a trusted retail store. If the installation CD is not provided with the printer, then you can download it from this page or the official site. To download the Epson WorkForce WF110 printer driver from this site, click the Driver Download button and perform the on-screen instructions. After the download, you can begin the driver installation process.

Driver Download

Epson WF 110 Driver Download

If you want to download the Epson WorkForce WF110 printer driver from the printer’s official site, then follow the guided instructions given below.

  • Navigate to the official site of the Epson printer from your Windows or Mac system’s web browser.
  • Search for the Epson WorkForce WF110 printer and select it.
  • Click the Downloads tab and choose your Operating System from the given drop-down menu.
  • To continue, click the OK button.
  • A list of drivers available for the selected OS family will be displayed on the screen.
  • Locate the Epson WF 110 driver you want and click the Download button available beside it.
  • Wait for the Epson WF 110 driver download process to complete.
  • After that, begin the Epson WF 110 setup printer driver installation on your Windows or Mac system and finish it by following the on-screen instructions.

Epson Workforce WF110 Manual

To download the PDF copy of the Epson WorkForce WF110 printer’s user manual, locate and click the Manual Download button available on this screen. Once the user manual is downloaded successfully, open it on your system’s PDF reader, and utilize it as per your need for Epson WF 110 setup and to connect printer wireless and troubleshooting.

Epson WF 110 Driver
Manual Download

Epson WF 110 Wireless Setup

To know how to connect your Epson WorkForce WF110 printer to a system over a wireless network using the printer’s control panel, read and proceed with the guided instructions given below for Epson WF 110 wireless setup.

  • Switch on your printer, wireless router, and the computer.
  • Make sure that you have done the printer’s hardware setup by following the instructions provided above.
  • Now, go to your computer, and insert the driver software installation CD or open the downloaded driver file to begin the software setup process.
  • Follow the prompted instructions displayed on the driver installation wizard.
  • When prompted, select the diver file you want and click the Install button and proceed with Epson WF 110 wireless setup.
  • Wait for the selected Epson WF 110 driver files to install.
  • Once it is done, the Select Your Connection screen will appear on Epson WF 110 setup printer.
  • Choose the Wireless Connection option by clicking the radio button available beside it.
  • Click Set up printer for the fist time Yes (recommended) Using Control panel.
  • Now, navigate the printer’s control panel and perform the instructions as instructed below.
  • Select Wi-Fi Setup Wi-Fi (recommended) Wi-Fi Setup Wizard.
  • Now, a list of wireless network’s SSID will appear on the screen.
  • Highlight your Wi-Fi network name from the list and press the OK button on the Epson WF 110 setup printer’s control panel.
  • Type the security key of your wireless network in the given field.
  • Make sure to enter your wireless network’s password correctly.
  • Once the Epson WorkForce WF110 printer is connected to your Wi-Fi network, return to the Epson WF 110 driver installation wizard and finish the remaining set of the Epson WF 110 wireless setup process.
  • Finally, try a test print to check the printer functions.

Epson WF 110 Print Setup

The Epson WorkForce WF110 printer lets you perform the print operation from your hand-held, laptop, or desktop device. First, make sure that you have done the initial printer setup as per the instructions.If not, perform the printer setup instructions provided above and then continue with the Epson WF 110 setup procedure.

For iOS and Android Device Users:

Connect your printer and the iOS or Android device to the same Wi-Fi network setup to perform the print operation. Now, open the document you want to print, tap the menu icon, and perform the on-screen Epson WF 110 print setup instructions.

  • You can also perform the print operation remotely by using the Epson Connect and Google Cloud Print options.
  • Contact our technical support team to know more about this method for Epson WF 110 print setup.
  • To perform the print operation using the voice-activated assistant feature, add your Epson printer to the Epson Connect account.
  • After that, link your Epson Connect account with a voice-activated assistant.
  • To perform print operations from your desktop or laptop, install the printer driver software on your device for Epson WF 110 print setup.
  • After that, open the document you want to print and perform the on-screen Epson WF 110 setup instructions.
Epson WF 110 print setup