Epson Wf 3730 Setup

Epson WF 3730 Setup

Epson Workforce Pro WF 3730 Setup

Epson WorkForce Pro WF-3730 is a multifunctional printer that does printing, scanning, and copying activities. It contains a tray that has a width of 500-sheet capacity. This Epson Wf 3730 setup printer is equipped with the double-side or duplex printing feature, a cartridge system of very high speed, and an LCD touch screen.

To set up your Epson Workforce Pro WF 3730 printer, execute the following steps:

  • Remove all the packing materials and orange tapes from your printer package.
  • Lower the scanner unit of your printer.
  • Connect one end of your power cable to the back of your printer and the other end to the wall socket.
  • Lift the control panel and turn on your printer. On your LCD screen, choose the language, region, and time.
  • To install the ink cartridges, raise the scanner unit until it locks.
  • After unpacking the cartridges, remove the yellow tape from every cartridge.
  • Insert the ink cartridges in the holders according to their colors. Now, lower the scanner unit.
  • To load paper into the printer, ensure your Epson Wf 3730 setup printer has completed charging the ink. Now, close the control panel, raise the output tray, and take out the paper cassette.
  • Gently slide the side edge guides out and then set the front edge guide to the size of the paper that you use.
  • Insert paper with the printable side facing down.
  • Pull the output tray extension from the printer.
  • On the control panel of your printer, choose the paper settings
  • Now, proceed to Epson Wf 3730 driver installation.
  • Before installing your printer software, make sure the Epson Wf 3730 setup printer is not connected to your computer.
Epson Wf 3730

Epson Wf 3730 Driver

The printer driver for your Epson WorkForce Pro WF 3730 printer converts the data to be printed into a format that could be understood by the printer. The Epson Wf 3730 driver also sends the converted data to the Epson Wf 3730 setup printer. In addition to the Drivers and Utilities Combo Package Installer and the Printer Driver v2.65.01, Scanner Driver and Remote Print Driver are two other options present on the Driver Downloads page on the official site of the Epson WorkForce Pro WF 3730 printer.

Driver Download

Epson Wf 3730 Driver Download

To download the driver for your Epson Workforce Pro WF 3730 printer, execute the following steps.

  • Navigate to the official site of your Epson Workforce Pro WF 3730 printer.
  • You will find the Epson WorkForce Pro WF-3730 title along with the picture of the same printer.
  • Under this picture, you will find various tabs. Click the Downloads tab.
  • Under this tab, you will find the drop-down list for the Operating System.
  • Choose the operating system of your choice. You will see Recommended For You section. Under this section, you will see some sub-sections like:

Drivers and Utilities Combo Package Installer

Drivers

Utilities

Firmware

When you click each of these sections, you will find a list for each one of them. You will also find the Download button next to each item on the list. Click the Download button to download any of the Epson Wf 3730 drivers.

Epson Wf 3730 Manual

To open and view the manual for your Epson Wf 3730 setup printer, carry out the following instructions:

  • Navigate to the official site of your Epson Workforce Pro WF 3730 printer.
  • You will find the Epson WorkForce Pro WF-3730 title along with the picture of the same printer.
  • Under this picture, you will find various tabs. Click the Manuals and Warranty tab.
  • You will see the following:

The Installation Guides in English and Spanish.

The User’s Guide

Quick Guide

Safety Data Sheets with a number of Part Numbers.

You will find the PDF buttons next to each of the above guides. Click this button to view the manual or guide of your choice.

Manual Download

Epson Wf 3730 Wired Setup

For the Epson Wf 3730 wired setup of your Epson WorkForce Pro WF 3730 printer, make use of the following steps:

  • Take an Ethernet cable. Connect one end of this cable to your printer’s LAN port and the other end to your router’s LAN port.
  • Now, uninstall your Epson Wf 3730 setup printer’s software.
  • On the official site, download and install your Epson Wf 3730 driver software. To do this, execute the instructions displayed on the screen for Epson Wf 3730 wired setup.
  • The Select Your Connection screen will be displayed. Choose Wired network connection.
  • In case you find the Select Printer Setup Option screen, choose Set up printer for the first time.
  • Carry on with the remaining instructions displayed on the screen.

Epson Wf 3730 Wireless Setup

You can connect your Epson WorkForce Pro WF 3730 printer to your network using WPS (Wi-Fi Protected Setup). You can do this only if your network is using a WPS-enabled wireless router.

For using WPS, follow the Epson Wf 3730 wireless setup steps given below:

  • Click the home button (only if it is necessary).
  • Click the Wi-Fi icon.
  • On the screen that is displayed, select the Wi-Fi (Recommended) option.
  • Choose Push Button Setup (WPS).
  • To complete the WPS setup, follow the steps displayed on your LCD screen of Epson Wf 3730 setup printer.
  • To exit, click the home button.

The Epson Wf 3730 wireless setup of your Epson WorkForce Pro WF 3730 printer is now complete.

Epson Wf 3730 Scan To Email

Using your printer’s Control Panel, you can scan and email a file. For scanning to email, you should have an email server that is pre-configured. You can select an address from the Contacts list, or you can enter the email address on the printer’s Control Panel manually for Epson Wf 3730 scan to email. 

  • Keep the file to be scanned on your Epson Wf 3730 setup printer.
  • If needed, press the home button.
  • Click the Scan button for Epson Wf 3730 scan to email. 
  • On the next screen that is displayed, select the Email option.
  • On the next screen you see, choose Contacts. From the Contacts list, select an email address.
  • Choose Scan Settings.
  • To select the file format for your scanning, select File Format.
  • If necessary, scroll down the page and change the Subject and the File Name settings.
  • If any extra scan settings are necessary, select them.
  • To save the scan settings, press the Preset button.
  • Press Send.

Your Epson WorkForce Pro WF 3730 printer scans your file and emails it.

Epson Wf 3730 Scan To Pdf

By using your printer’s Control Panel, you can easily scan a file and save it as a PDF on your computer. There is also the facility to attach the same file as an email. The condition is that your computer must be connected to the same network setup to which your printer is connected. 

  • Ensure you have installed Event Manager and Epson Scan 2 on your computer for Epson Wf 3730 scan to pdf.
  • Position the file to be scanned on your printer’s scanner glass.
  • If needed, press the home button.
  • Click the Scan button to begin Epson Wf 3730 scan to pdf. 
  • On the screen that is displayed, choose the Computer option. If needed, click OK to close your information screen.
  • Click Select a computer. Now select USB Connection.
  • Choose Save as PDF. 
  • Choose Save as PDF again in order to save the scanned file (document or image) as a PDF.
  • To start scanning on Epson Wf 3730 setup printer, click the Save button.