Epson Et 2720 Setup

Epson ET 2720 Setup

Epson EcoTank ET 2720 Setup

  • The protective materials and packing tapes should be removed from the Epson ET 2720 setup printer.
  • Lift the ink tank access area’s cover, open the black ink tank’s cap, and fill the black ink tank with black ink provided along with the machine.
  • Do the previous step again to fill the cyan, magenta, and yellow ink tanks with the respective inks, respectively.
  • After closing the ink tank access area’s cover, use a power cord to connect to the rear port of the Epson Eco Tank ET2720 printer to the electrical outlet.
  • Lift the control panel cover and hold the ON button until you see the Power LED turning on.
  • When prompted, set your language.
  • Charge the ink by pressing the Start button on the machine’s control panel.
  • Press OK and continue with the initial printer setup.
  • Lift the paper support of the machine, adjust the edge guides, and keep some paper in it.
Epson EcoTank ET 2720 Setup
  • Set the paper settings on the Epson Eco Tank ET2720 printer’s control panel and perform the Epson ET 2720 setup by installing the driver on your computer.

Epson ET 2720 Driver

Available drivers list

  • Printer Driver v2.60.01
  • Drivers and Utilities Combo Package Installer
  • Scanner Driver and Epson Scan 2 Utility v6.4.9.0
  • Remote Print Driver v1.66
  • The recommended Epson ET 2720 driver for the printer is the Drivers and Utilities Combo Package Installer.
Epson ET 2720 Driver

Epson ET 2720 Driver Download

The link to download the Epson ET 2720 setup printer driver for both your Windows and Mac Operating Systems is given below. Click this link and proceed with the installation steps.

Epson ET 2720 Driver Install

  • Once you complete the hardware setup of the Epson Eco Tank ET2720 printer, install the driver on your computer using the installation CD.
  • If your computer does not have a CD drive, download the Epson ET 2720 driver package from the official Epson website.
  • Open the Epson Eco Tank ET2720 installer file by double-clicking it.
  • When the installation begins, the Software Selection window appears on the screen.
  • Select the following options.
  • Epson drivers and utilities
  • Allow Windows Firewall to unblock Epson utilities
  • Epson User’s Guide link
  • Epson Customer Research Participation software
  • Click the Install button to initiate the software installation.
  • The Select Your Connection window opens on the screen for Epson ET 2720 setup.
  • You can see the Wireless Connection and Direct USB Connection options.
  • Select any one of the connection types to establish a connection between the machine and the computer.
  • Once you click the Next button, the Select Setup Option window displays on the screen.
  • Select your desired setup method and click Next.
  • Perform the remaining steps by following the on-screen step-by-step instructions.

Epson ET 2720 Manual

Manuals list

  • Start Here - Installation Guide - This manual contains hardware and software install of the Epson ET 2720 setup printer
  • User’s Guide - Epson ScanSmart - This Epson ET 2720 manual provides details about how to use Epson ScanSmart software
  • Notices and Warranty
  • Safety Data Sheets - The information covered in this manual are ink cartridge composition, precautions for handling ink cartridge, and regulatory considerations. A separate PDF file is available for each ink cartridge.
  • Get a soft copy of the Epson Eco Tank ET 2720 manual by clicking the Manual Download button on this website.
Epson ET 2720 Manual

Epson ET 2720 Wireless Setup

Establish a wireless network connection between your computer and your wireless router. To connect the Epson ET 2720 setup printer to a wireless network and to customize the wireless network settings, carry out the Epson ET 2720 wireless setup instructions given below.

  • Install the Epson ET 2720 driver file using the Epson installation CD and proceed with the on-screen guidelines to complete the installation process of the Epson Eco Tank ET-2720 printer.
  • While performing the installation steps, select Wireless Connection in the Select Your Connection window for Epson ET 2720 wireless setup.
  • On the Epson Eco Tank ET-2720 printer’s control panel, select the Wi-Fi Setup option on the main screen.
  • Select Wi-Fi (Recommended) -> Epson ET 2720 Wireless Setup Wizard.
  • Select the wireless network name of your wireless network setup using the arrow buttons on the machine’s control panel.
  • Now, you have to provide the wireless network security key (password).
  • Once you press the Start or Stop button, you can see the blue Wi-Fi icon on the Epson ET 2720 setup printer’s LCD panel.
Epson ET 2720 Wireless Setup

Epson ET 2720 Troubleshooting

The Epson ET 2720 troubleshooting problems occurring with the Epson Eco Tank ET2720 printer are related to the sections listed below.

  • Product status messages
  • Setup problems
  • Network problems
  • Copying problems
  • Paper problems
  • Print quality problems
  • Scanning problems
  • Uninstall your product software
  • Click the Call button to get help from our technical support experts.
  • One of the frequently occurring problems is machine not turning on.
  • The Epson ET 2720 troubleshooting solution to this problem is provided here for your reference.
  • Check if the power cord is connected properly to the Epson Eco Tank ET2720 printer and the wall outlet.
  • Disconnect the power cable and reconnect it if needed.
  • Hold the ON button for a longer duration until the Epson ET 2720 setup printer is powered on.