Epson Artisan 837 Setup

Epson Artisan 837 Setup

  • Home
  • Epson Artisan 837 Setup

Epson Artisan 837 is a photo printer. It is the brand of choice amidst professional photographers. This printer is famous for its sleek, compact design and powerful performance. It has two paper trays. It also supports automatic double-sided printing.Let’s now look into the Epson Artisan 837 setup in detail.

Unboxing the printer:

  • First, open the printer box.
  • Next, check whether all the following components are present inside the box:
  • The Epson Artisan 837 printer
  • Power cable
  • Ink cartridges
  • The installation CD
  • The Quick Start Guide
  • You need to remove all the protective materials from the printer. These include the materials from the inside of the paper cassette also.
  • Next, raise the scanner unit. Now, you have to remove the transportation lock.
  • Make sure that you store the transportation lock separately.
  • You can now lower the scanner unit.
  • You have now completed the initial stage in the Epson Artisan 837 setup.

Powering on the printer:

  • Take the power cable and connect one of its ends to the back of the printer.
  • Now, plug the opposite end of this power cable into an electrical socket.
  • Refrain from connecting the printer to the computer until you are prompted to do so during the software installation.
  • You have to press the On button on the printer. This action will turn on the printer.
  • Adjust the control panel, if required.

Choose the settings:

  • Take the power cable and connect one of its ends to the back of the printer.
  • Now, plug the opposite end of this power cable into an electrical socket.
  • Refrain from connecting the printer to the computer until you are prompted to do so during the software installation.
  • You have to press the On button on the printer. This action will turn on the printer.
  • Adjust the control panel, if required.

Choose the settings:

  • You need to choose the desired language and the country.
  • It is now time to select the Daylight Saving Time setting. For this task, you can choose between Winter and Summer and then continue with the Epson Artisan 837 setup.
  • Choose the date format. Now, utilize the numeric keypad to set the correct date.
  • You have to press the OK button on the printer control panel.
  • Pick the time format--12h or 24h. Make use of the numeric keypad to set the correct time.
  • Press the OK button.
  • Remember that you can alter the date and time settings later from the printer control panel.

Installing the ink cartridges:

  • First, lift the scanner unit.
  • Next, start unpacking the ink cartridges.
  • From every cartridge, remove just the yellow tape.
  • You have to insert the cartridges into the holders for every color. Make sure that you press these cartridges down until they click into place.
  • You can now lower the scanner unit and continue with the Epson Artisan 837 setup.
  • The printer will now start the priming process. It will take around 7 minutes.
  • Once priming is over, you will find a menu on the printer’s LCD screen. Refrain from choosing any option from this menu as of now. Continue with the next section to load paper into the printer.
Epson Artisan 837 Setup

Loading paper into the printer:

  • Open the printer’s front cover.
  • You need to pull out the paper cassette located at the bottom of the printer.
  • Next, you need to slide back the printer’s photo tray and then lift it.
  • It is now time to slide out the edge guides by squeezing them.
  • Take a stack of paper. Fan it well. Now, use a flat surface to make the edges of the stack even and then move on to the next step in the Epson Artisan 837 setup.
  • Start inserting the stack such that the printable side faces down.
  • You can now slide the edge guides against the stack of paper. Confirm that the paper is below the tabs on the edge guides.
  • Turn your attention to the photo tray. Lower it carefully.
  • You need to squeeze the edge guides and slide them out. Insert photo paper with the printable side facing down.
  • Now, you should slide the edge guides against the photo paper. Make sure that the cassette is flat as you insert it inside.
  • You have to extend the output tray. Follow this action by flipping up the paper stopper.

The hardware part of the printer setup is now over. Once you install the printer software, the entire Epson Artisan 837 setup will be complete.