Brother MFC J895dw setup

Epson Artisan 1430 Wifi Setup

Epson Artisan 1430 is a wireless and wide-format InkJet printer. It is a color printer that yields high-definition prints. Apart from ordinary paper, you can print envelopes using this printer. Its sheet feeder capacity is approximately 100 sheets at 20 lb. You can use this printer both at home and office to get awesome printouts of your documents and photos.The printer supports Wi-Fi connectivity. You can utilize the procedure given below to perform the Epson Artisan 1430 Wi-Fi setup.

Pre-requisites to be met:

  • First, make sure that the initial printer setup is complete.
  • Next, ensure that the printer is placed close to the wireless router or access point. This step decreases the amount of signal distortions between your printer and wireless router.
  • Turn on the printer and the wireless router in case they are turned off.
  • Refrain from placing the printer near the following things:
  • Microwave ovens
  • 2.4 GHz cordless phones
  • Large metal objects, like filing cabinets
  • Once the above conditions are met, you can easily perform the Epson Artisan 1430 Wi-Fi setup. You can achieve this task either by using the Wi-Fi Protected Setup (WPS) or via the EpsonNet Setup.
Epson Artisan 1430 wifi setup

Using Wi-Fi Protected Setup (WPS):

  • First, you should press the WPS button on the router.
  • Within 2 minutes of pressing this button, press the Wi-Fi button on the printer. You need to hold this button down for 3 seconds.
  • Now, the Wi-Fi light on the printer should turn solid green. This signal indicates that you have completed the WPS method successfully.

In case you are connecting the printer via EpsonNet Setup, confirm that the printer software has been installed properly. Once you have completed the Wi-Fi setup, the Wi-Fi light on the printer should turn solid green (as it does in the WPS method). If it doesn’t, you have to make sure that the printer software is correctly installed. If necessary, you might have to reinstall the software.

Printing a Network Status sheet:

Printing a Network Status sheet: You need to print a Network Status sheet so that you can determine the causes of any problems you face while using the printer on a network. So, immediately after performing the Epson Artisan 1430 Wi-Fi setup through the WPS setup or EpsonNet Setup, start printing your Network Status sheet. To achieve this task, press the Network Status button on the printer. You can examine the settings displayed on the Network Status sheet to diagnose any problems you might have.

You have now successfully finished the Epson Artisan 1430 Wi-Fi setup.