Canon Printer Error Code B200

How To Fix Canon Printer Error Code B200>

  • Home
  • Canon Error Code B200

The Canon printer error code B200 may occur if there are any problems with the print head. The error also occurs due to problematic ink cartridges. Consider the procedure that is given below to fix the issue.

Step 1: Check the ink cartridges

  • Remove all the ink cartridges. Check whether the ink level in any of the ink cartridges is low.
  • To check the ink cartridges, open the Canon IJ Status Monitor.
  • Select the Maintenance tab and click View Printer Status.
  • If you find that the ink level is low, replace the particular ink cartridge with a new one.

Step 2: Cleaning the print head

  • Remove the print head and clean the copper contacts on it thoroughly.
  • Hold the print head under a hot water tap and flush out the dried ink inside it. Now, dry the print head.
  • Reinstall the print head. Make sure that the ribbon cable connector is fixed correctly in the print head.
  • Check if the Canon printer error code B200 appears again.

Step 3: Reinstall the printer driver

  • If the issue persists, reinstall the printer driver as the error may also occur if the printer driver is corrupted.
  • Uninstall the printer driver installed on your computer.
  • You can download the latest version of the printer driver from the official Canon website.
  • Mae sure to download the printer driver for your operating system.

Step 4: Reset the printer

  • If the Canon printer error B200 appears again, reset the printer.
  • Turn off the printer and remove all the connections. Leave it disconnected for at least 30 minutes.
  • Now, reconnect the cables to the printer and reconnect the power cable. Turn on the printer and verify whether the issue is fixed.
  • A long reset will allow the printer to cool down and restore everything to factory defaults.
  • Now, the Canon printer errore B200 will be fixed.

If the Canon printer error code B200 issue is persist, you can click the Call button on this page to reach our technical support team.