Canon Pixma TR4520 setup

Canon Pixma TR4520 Setup

Canon Pixma TR4520 Install

For unboxing the Canon Pixma TR4520 setup printer, remove its packing materials. Peel off the orange tapes. Discard the orange tape and all the packing materials.

  • Open the cover of the rear tray.
  • Lift the paper support.
  • Open the cover of the feed slot.
  • To open the paper guides, slide them. In the center of the rear tray, load the paper with the print side facing upwards.
  • To align paper guides with both sides of the paper stack, try sliding them.
  • Open the paper output cover of the printer.
  • Make sure not to touch the Fine cartridge holder till it stops.
  • From the Color Fine cartridge, peel off the protective tapes.
  • In the left holder, install the Color Fine cartridge.
  • Hold the Color Fine cartridge in a diagonal position and insert it in a gentle manner.
  • Ensure that you do not touch the electrical contact located at the end of the cartridge holder.
  • Lift the Fine cartridge until you hear a clicking sound.
  • Install the Fine black cartridge in a similar manner into the right holder.
Canon Pixma TR4520 driver
  • Confirm that the cartridges are installed properly. If they are not, then remove and reinstall them.
  • Close the paper output cover.
  • If you see a message stating ‘Install the ink cartridges 1687,’ check again to see if the cartridges are properly installed on Canon Pixma TR4520 setup printer.

Canon Pixma TR4520 Driver

Canon Pixma TR4520 printer is a multi-functional printer of very-good quality.The Canon Pixma TR4520 driver converts the print/scan data created by the application software into a type of data that the printer can receive and process. The printer driver also sends the converted data to the printer. To install the Canon Pixma TR4520 driver on your Canon Pixma TR4520 printer, use Start Canon Pixma TR4520 Setup that comes along with your Printer setup CD-ROM.

Canon Pixma TR4520 Driver Download

To download the driver for the Canon Pixma TR4520 printer, carry out the following steps:

  • Navigate to the official site.
  • Under the heading PIXMA TR4500/TR 4520, click the Drivers & Downloads button.

Under the list of drivers and downloads, select Windows 10 (x64). Two file options will be displayed.

The options are:

TR4500 series MP Drivers Ver.1.01 (Windows)

TR4500 series Full Driver & Software Package (Windows)

  • When you click any one of the two options, the File names and their Supporting Documents will be displayed. Click the Download button provided next to the required files.

Canon Pixma TR4520 Manual

For viewing the Canon Pixma TR4520 manual, execute the following steps in order:

  • Navigate to the official site.
  • Under the heading PIXMA TR4500/TR4520, click the Manuals tab. The manuals for the various operating systems will be displayed.
  • Select a manual based on your operating system. Example: For Windows, select TR 4500 series (PDF) User Manual (Windows).
  • Click the View button on the right side of the page (the one next to the title that you clicked).

You can now view and refer to the Canon Pixma TR4520 setup printer manual.

Canon Pixma TR4520 Wireless Setup

For wireless printing, you will need a working network with wireless capability 802.11b/g/n. For a wireless connection, you will need a computer or a mobile device that is Wi-Fi enabled. You will also need a wireless router for Canon Pixma TR4520 wireless setup. All these devices must be connected to a single wireless network. You can have a wireless network using both Windows and Mac operating systems.

Canon Pixma TR4520 Connect to Wi-Fi

For Windows, execute the steps given below for a Wi-Fi connection:

  • Power up your router and printer to proceed with Canon Pixma TR4520 connect to wi-fi.
  • Turn on the Easy wireless connect mode on the Canon Pixma TR4520 printer.
  • Perform the settings using the IJ Network Device Setup Utility for Canon Pixma TR4520 wireless setup.
  • Check to see if the Canon Pixma TR4520 printer is turned on.
  • Press the Canon Pixma TR4520 Setup button. The Setup menu screen is displayed.
  • Choose Wi-Fi Setup. Click the OK button for Canon Pixma TR4520 wireless setup.
  • Select Easy Wi-Fi connect. Click the OK button.
  • Follow the Canon Pixma TR4520 connect to wi-fi instructions on your screen.
  • If the message the Canon Pixma TR4520 wireless setup is completed is displayed, click the OK button.
Canon Pixma TR4520 wireless setup

Canon Pixma TR4520 Duplex Printing

Double-sided printing is also called duplex printing. You can accomplish Canon Pixma TR4520 Duplex printing manually on your printer by carrying out the following steps:

  • Make sure there are enough paper loaded into the printer.
  • Go to the Canon Pixma TR4520 Driver Setup window on your computer.
  • On the Page Setup tab, check the Canon Pixma TR4520 Duplex Printing checkbox
  • Uncheck the Automatic checkbox
  • From the Page Layout list, choose Normal-size, Fit-to-Page, Scaled, or Page Layout.
  • Specify the side you want to staple.
  • Set the appropriate margin width. Finish the Canon Pixma TR4520 setup.
canon pixma tr4520 duplex printing